Stanley DUBUIS BPP1305 User Manual page 10

USING THE BPP1305 WITH DOUBLE CONNECTOR
Set the Trigger Lock BEFORE inserting
or removing dies from the Crimping Head.
Set the trigger lock.
Insert the cable with
connector to crimp into the die.
Release the trigger lock.
Note: Release the trigger to immediately
stop the tool. Press the pressure release
at any time to open the jaws.
10 ► BPP1305 User Manual
USING THE TOOL
DO NOT CRIMP LIVE CABLES
Insert battery.
BAD POSITION OF
the
THE CONNECTOR
Insert the die into the crimping
Press and hold the trigger until the die is crimped.
The InteLED flashing green : good crimping.
Press and hold the pressure release until the
return of the piston.
KEEP HANDS CLEAR OF
THE MOVING PARTS
head.
GOOD POSITION OF
THE CONNECTOR
Pressure release
Trigger