Skanti E5002 Instruction Manual page 12

The table 3.1.2. suggest a subdivision of the frequency range
1.6 rmz -30 rmz for the I 5002.
Transmitting
frequency (rmz)
1.6 -1.9
1.9 -2.3
2.3 -2.8
2.8 - 3.4
3.4 -4.0
4.0 -4.8
4.8 -5.8
5.8 -7.0
Transmitting
frequency (rmz)
7.0-8.4
8.4 - 10.0
10.0 - 12.0
12.0 -14.4
14.4 - 16.9
16.9 -20.3
20.3 -25.0
25.0 -30.0
Table 3.1.2.
The band decoding memory runs in steps of 100 kHz.
NOTE: Then the exciter E 5002 is used on frequeocies below 1600.0 kHz,
the PRon 303 IC16 mst be chaaged according to paragrapb 3.2.13.
3.1.5. Information on the transmitting frequency of every frequency No. is
Stored in the frequency memory. It i9 posgible to store two more bits
of infomation on each frequency No. ; one is determined for tran8mi9-
sion of node A3H-simplex irrespective of the node Selected by tbe
POwER and roDE switches (e.g. distress frequency) , the other for
auxiliary purpose via the remote control interface {e.g. cbange of
bean direction) .
3.1.6. Programing frequency No. zero can be done in tuo uays.
If it is convenient that this frequency No. contains the infomation
associat:ed with an often used transmitting frequency.
On the other hand, if it is not desired to store afly transmitting Ire-
quet`cy information associated with frequency No. zero, this can be done
by programing the frequency 00000.0 kHz into ttie nemry at frequency
No. zero.
When the exciter is used in conjunction with the I 5000 transmitter
pover anplifier the frequency No. zero i9 selected when the band Switch
on I 5000 is set in the 2182 position.
The programing instructiotis for frequeacy No. zero do oat differ fron
the instructions concerning any other frequency No.
3.1.7. The easiest method of checkiag the progr-ed frequencies and band in-
formtion when the PROMs have been munted in their aocketg i8 to Coo-
neat a frequency counter to the output BNC 8ocbet. 301SR5. of the ep
citer. The output socket is the oae carrying no colour code. It i.
nomally comected to the trananitter pouer axplifier vi. a co.a[i.1
cable. - Unplug the cable and comect the counter to this .octet.
3-2
T. r . i . , . - ;