Table of Contents
Advertisement
Service menu content (cont.)
2
21 HWC
Settings
22 Max RPM
23 Drain
24
Show temp
25
Change temp
26 Programs
27 Spin time
28 Coin
29 Reset
210
Temporary
language
Return
Off (default)
Valid for products manufactured from February 2012.
On
400 rpm
This function only works for programmes Pr1-Pr25.
600 rpm
800 rpm
1000 rpm
1200 rpm
(default)
1300 rpm
1400 rpm
Pump
(default)
Valve
Temp Off
Only applies to the disinfection programmes (Pr17-Pr19).
Temp On
Pr1-Pr25
This can be changed in steps of 1°C between -10°C to 10°C.
You cannot set a total temperature that exceeds +92°C. The
program shall still show the original temperature in the LCD
Pr1-Pr28
Select "On" or "Off"
Programmes can be activated/deactivated. A deactivated
programme is not shown on the display.
A maximum of 10 programmes can be shown on the display
in programme mode. If more than 10 programmes are
activated, then only the first ten activated programmes are
shown on the display.
If all the programmes have been deactivated, the display only
shows "Pr1".
If the machine is Swan-flag is set, "Pr1" and "Pr2" are always
activated/On.
If allergy flag is set Pr20 – Pr25 is always On
0-300 sec
• Extend or shorten the spin time: 0-300 sec.
• If "0 sec" is selected, the pre-programmed spin time is used.
• If a time in the interval "1 sec" to "300 sec" is selected, this
time is added to the pre-programmed spin time.
• This function only works for programmes Pr13 and Pr14.
Coin Off
See the wiring diagram for the correct connection and
functionality of a slot meter.
Coin On
Only
Used only in production
production
Pressing S4 a reset is performed and the following action is
reset
performed.
1.Language settings is accessed, language confirmed by S4.
Off (default)
When flag is On it shall be possible to temporally change to
On
language in the machine.
The language shall return to selected machine language
(selected in user menu) when the program is finished.
The selection step shall be placed after program P28.
Pressing S5 the program returns to Service mode.
8
Advertisement
Table of Contents
