Panel And Control Card Replacement - Asko WM80 C Series Service Manual

17. Panel and control card replacement

1. Attach the anti-static wristband to a part of the machine
that is earthed!
NB: An anti-static wristband must be used, otherwise you
risk destroying the control card.
2. Undo the three screws holding the top cover in place.
3. Remove the top cover.
4. Use a screwdriver to carefully free the panel. As you do
so, carefully angle the panel outwards.
5. Remove the panel and the cables. NB: Don't forget to
remove the pressure sensor tube.
6. Carefully pull the programme selector from the panel.
7. Use a screwdriver to free the control card from the
panel. NB: The control card must be placed in an ESD-
safe bag.
8. Check that the push button, lens and
decorative inlay are in place. Now carefully press the new
control card into place. NB: Don't forget to replace the
rubber seal.
24