Making A Custom Programme - Asko WM80 C Series Service Manual

9. Making a custom programme

You can make three custom programmes. This is done in the service menu. In order for
the new programme to be made available, one of the existing programmes must be
deactivated, that is, set to "Off", and the new programme set to "On". See also the "3
Special" section of the "Service menu content" chapter.
Opening the settings menu
Programming
1
2
3
4
5
6
7
8
9
If the machine is on: First turn off the power at the main power
switch (S1).
Press and hold the key button (S5) while simultaneously
pressing the main power switch (S1).
Press the Start/Stop button (S4) 5 times within 5 seconds. The
service menu now opens.
Turn the programme selector (J1) to "3 Special".
Press the Key button (S5) to open the "3 Special" menu.
Turn the programme selector (J1) to cycle through the different
options: Pr20, Pr21, Pr22 and Return.
Press the Key button (S5) to open one of the options, Pr20, Pr21
or Pr22. Now you can create your programme by selecting from
the various options and settings.
Turn the programme selector (J1) to cycle through the different
menus:
-34 Pre wash
-35 Main wash
-38 Spin speed
-Return
Press the Key button to open one of the menus.
Turn the programme selector (J1) to cycle through the different
menu options.
Press the Key button to save the setting and return to the
previous menu level. Repeat steps 5 to 8 to program the
remaining settings.
Once you have finished creating the programme, press the Start/
Stop button (S4) to return to the programme menu.
11
-37 Extra spin
-36 Rinses
-39 Spin time