Advertisement
HOW TO USE
The upright vacuum cleaner is designed to be used on multiple types of carpeting. Do
not attempt to use the upright vacuum cleaner on bare floors, as damage to the floor
covering may result.
Handle Adjustment
With the tip of the foot, press down to release
the handle lock located at the left rear side of
the cleaner. Move the handle and adjust it to
the desired position for (1) storing upright, (2)
operating the cleaner at a comfortable height
for the user, and (3) cleaning underneath low
furniture.
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of
body away from any moving part (such as the revolving brush).Turn off
the switch and unplug the cleaner before changing the cleaner height
setting.
The front of the cleaner has an adjustment
that raises or lowers the cleaner base to
match the type of carpet. With the cleaner
cord unplugged, set the adjustment to lowest
setting for maximum cleaning. If the cleaner
is difficult to push, move adjustment to next
highest setting until cleaner is comfortable to
push.The brush roll must reach the carpet for
effective cleaning.
1. Store
Handle Lock
Make each adjustment with cleaner
switch off and cord disconnected
from outlet. For ease in moving the
adjustment knob, place handle in
operating position and tilt cleaner back
to remove weight from front wheels.
2. Use
3.Clean
Underneath
7
Advertisement
