Caberg PRO SPEAK EVO Assembly
For duke x
Hide thumbs
Also See for PRO SPEAK EVO:
- Instructions manual (49 pages) ,
- Assembly (3 pages) ,
- Assembly (3 pages)
Advertisement
Quick Links
ASSEMBL Y
A9235 PRO SPEAK EVO
FOR DUKE X
1.
2.
3.
4.
Remove the anti-noise inserts by pulling
them out of the chinstrap.
Place the right speaker (R)
on the cheekpad's pp plate
after applying the adhesive round
shaped velcro included in the package.
Repeat the operations performed for the
right (R) speaker for positioning the left
(L).
Without pulling the chinstrap out of the
cheekpads, pass the microphone cable
and the flat cable of the remote control
into the hole of the cheekpads.
Advertisement
Related Manuals for Caberg PRO SPEAK EVO
Summary of Contents for Caberg PRO SPEAK EVO
- Page 1 ASSEMBL Y A9235 PRO SPEAK EVO FOR DUKE X Remove the anti-noise inserts by pulling them out of the chinstrap. Place the right speaker (R) on the cheekpad’s pp plate after applying the adhesive round shaped velcro included in the package.
- Page 2 ASSEMBL Y A9235 PRO SPEAK EVO FOR DUKE X Pass the flat cable of the remote control cable between the neckroll’s pp plate and the shell. The remote control must remain accessible outside the helmet. Place the base of the microphone under the cheekpads, place the microphone’s...
- Page 3 ASSEMBL Y A9235 PRO SPEAK EVO FOR DUKE X Place the BT controller in the designated slot on the back of the inner shell. Place the USB socket between the cheekpad and the neckroll. Fit the keypad on the left side (helmet...