Paradyne KeepInTouch 3760 User Manual page 61

Table 4-1. AT Command and S-Register Reference (21 of 27)
AT
Command
Description
or
S-Register
S6= n
Blind Dial Pause Time
This register determines how long (in seconds) the
modem waits, after going off-hook, before dialing a
telephone number when the Dial Tone Detect
configuration option (X command) is disabled.
NOTE: Blind dialing is not allowed in some countries
outside of North America. Therefore, this command
has no effect in those countries. See Table 4-3 for
more information.
Acceptable values vary by country and are listed in
Table 4-2.
S7= n No Answer Time-out
This register determines how long (in seconds) an
originating modem waits before abandoning a call
when no answer tone is received.
Acceptable values vary by country and are listed in
Table 4-2.
S8= n
"," Pause Time for the Dial Modifier
This register determines how long (in seconds) the
modem pauses when it encounters a comma (,) in the
Dial command string.
Accepts a value from 0 to 255 seconds.
Factory setting is 2 seconds.
S10= n No Carrier Disconnect
This register determines how long (in tenths of
seconds) the modem allows the carrier signal to be Off
before disconnecting the call.
The time period may be a entered in 0.1 second
increments. Acceptable values vary by country and are
listed in Table 4-2.
In those countries which allow a value of 255, the 255
value disables this feature.
4-22
Issue 3 April 1994