Paradyne KeepInTouch 3760 User Manual page 25

3. Connection to a Telephone Outlet
If you intend to use regular telephone lines, use the 7-foot
cord that has the 2-pin connector and use this step. If,
however, you intend to use a cellular telephone, refer to the
Direct Connection to a Cellular Telephone section in
Appendix D, Cellular Communications .
Plug the modular cord's 2-pin connector into the modem's
2-pin rear edge connector. Since the 2-pin connector is not
keyed, it does not matter which way it is plugged in.
Next, plug the cord's modular telephone plug into the
telephone jack.
4. Make sure that your modem is installed and that your
PCMCIA slot is configured for modem operation before
using a communications or fax application. Refer to the
section Configuring Your PC to Use the KeepInTouch Card
Modem later in this chapter.
Issue 3 April 1994
2-3