Husqvarna 326P4 Series Operator's Manual page 18

ASSEMBLY
Assembling and dismantling the
two-part shaft (326P5)
Assembling:
• Make stax_ the handle is
lOOSe,
• @uide the cut-out on the
lower section of the slmft
into the eo:lpling's
locking plate on lhe
upper seciton of lhe
sha;t, The seclions are
then lo6ked together,
• Tighten the handle.
Dismantling
• Undo the hm:dle (at least
three turl _{,
• Press the handle towards
the coupling
• CaJ'erully twist the lower
section out of lhe lock.
• Hold both pa_is offhe
shaft m:d pull out the
lower section Dora the
coupling,
1 _ - Engrish