Download Print this page

Husqvarna 362M18 Operator's Manual

Back-packed motorized mister 362m18
Hide thumbs


Quick Links



  Summary of Contents for Husqvarna 362M18

  • Page 2: Table Of Contents

    Contents Safety ..............2 Warning labels on the machine .......3 Symbols on the machine .........3 What is what? ............3 Technical data ............4 Safety Precautions ..........5 Assembly ..............8 Fuel .................9 Operation ..............10 Maintenance ............12 Storage ..............14 Disposal ..............14 Safety Notes on types of warnings Safety first Instructions contained in warnings within this manual and warning seals marked with a...
  • Page 3: Warning Labels On The Machine

    Warning labels on the machine IMPORTANT If the warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
  • Page 4: Technical Data

    Technical data Model name and number Husqvarna Back-Packed Motorized Mister 362M18 Dry weight * (kg) External dimensions of main unit (length x width x height) (mm) 354x520x740 Capacity of chemical fluid tank (litres) Capacity of fuel tank (litres) Pump Speed (rpm)
  • Page 5: Safety Precautions

    Operator’s manual. This field may interfere with some pacemak- 10. Husqvarna AB has a policy of continuous ers. To reduce the risk of serious or fatal injury, product development and therefore...
  • Page 6 Safety Precautions hose connections, fuel leaks, defective NOTE or broken fluid gaskets, or damage to the To avoid noise complaints, in general, carrying band. operate product between 8 a.m. and 5 p.m. on weekdays and 9 a.m. to 5 p.m. on PRECAUTIONS WHEN TRANSPORTING weekends.
  • Page 7 Safety Precautions • Fully inspect and maintain protective clothing, PRECAUTION WHEN STARTING THE masks, gloves, and other protective gear in ENGINE preparation for the next session. • Keep children, animals, etc. well away when • After completing the work and tidying away starting the engine and spraying.
  • Page 8: Assembly

    Manual are required, high temperature. consult your product supplier or nearest • For replacement parts, use original HUSQVARNA product dealer. HUSQVARNA parts or brands designated by • Never keep the engine running while carrying HUSQVARNA. out inspections or maintenance. Assembly Connect the blow pipes and route the solution tube from the material tank to the mist nozzle.
  • Page 9: Fuel

    2. Put fuel into the fuel tank to 80% of the full formulated for air-cooled 2-cycle gasoline capacity. engine use. If Husqvarna oil is not available, 3. Fasten the fuel cap securely and wipe up any use an anti-oxidant added quality oil expressly fuel spillage around the unit.
  • Page 10: Operation

    Operation ■ STARTING ENGINE IMPORTANT • Hold the upper end of the control arm in hand • Avoid pulling the starter rope out to its full extent and, while pulling it away from the unit, rotate and allowing the starter rope to snap back. This arm forward (anti-clockwise as the arrow will prevent premature damage to the starter.
  • Page 11 Operation ■ HOW TO USE WARNING 1. Pour the solution into the tank with the • Before the solution spraying work, supply intermediate valve closed. water into the tank and operate the mister to make sure that there is any leakage or any mechanical failure.
  • Page 12: Maintenance

    Maintenance WARNING Make sure that the engine has stopped and is cool before performing any service to the blower. Contact with rotating blower fan or hot muffler may result in a personal injury. ■ AIR CLEANER Check the air cleaner every 25 hours of use or more frequently if used under dusty conditions.
  • Page 13: Shoulder Strap

    Maintenance IMPORTANT WARNING • Before starting operation, always make sure Never use the blower without the net of the to check if the muffler is properly held by three machine. Before each use, check that the bolts to the cylinder. (Fastening Torque : 8~12 net is attached in place and is free from any N·m) damage.
  • Page 14: Storage

    Storage WARNING 1. Clean the chemical fluid tank and nozzle (see • When draining fuel, be careful not to spill it. If page 11). fuel is spilt, wipe off thoroughly. In addition, 2. Remove dirt from the sprayer, inspect it for any be sure to close the storage container cap damage or looseness, and, if any abnormality is tightly.
  • Page 15 English - 15...