Page 5
Step 1 Attention to the dowel size: ø6*30mm Ø6 Ø8 ø6*30mm ø8*30mm ø8*30mm Insert wood dowel (A) and (B) into part 6. ø6*30mm Step 2 Fix one vertical rail 6 on the assembled bases 3, 4 and 5 with the screws (C),using Phillips Head Screwdriver.
Page 6
Step 3 C C C C C C C C C Fix the vertical rail 6 on the assembled bases 3, 4 and 5 with the screws (C) using a ø4*40mm Phillips Head Screwdriver. Step 4 Fix the rails 2 on the table top 1 with the screws (E) and washer (G), using a hex key (F).
Page 7
Step 5 Before attaching remove the adhesive protection. ø1/4*80mm Fix the assembled base to the table top 1 with the screws (D), using a hex key (F) and attach adhesive felt (H). Hex key Adesive Felt Step 6 Distributed weight.