Related Manuals for Walker Edison HT72MW
Summary of Contents for Walker Edison HT72MW
- Page 4 Join parts (2, 4, 6) and parts (1, 3, 5) as shown in the diagram. Secure parts together using bolts (C) as shown.
- Page 5 Join side assemblies to parts (7,8,9,10, 11) as shown in the diagram. Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C).
- Page 6 Secure parts together using bolts (A & C) as shown. Secure angle iron (H) using bolts (C). Attach seat (13) to frame assembly using bolts (B) as shown in the diagram.
- Page 7 Attach shelf (14) to frame assembly using bolts (B) as shown in the diagram. Join cross beams (15) together using bolt (F) and nut (G) as shown.
- Page 8 Secure cross beam assembly to frame using screws (E). Attach angle supports (12) to frame using bolts (C) as shown.
- Page 9 Use screw (N) to secure the hook to the wooden panel (8,9). (Optional) Insert wall plugs (J) into your wall at the indicated measurements if desired.
- Page 10 (Optional) Secure unit to the wall using screws (K) and washers (L) at the installation points of wall plugs (J) from previous step.