Advertisement
Quick Links
Advertisement
Related Manuals for Walker Edison HT68FRA
Summary of Contents for Walker Edison HT68FRA
- Page 1 HT68FRA Assembly Instructions Revised 04/2019 2018...
- Page 2 A Philips head screwdriver is required for this assembly. We do not recommend using power tools.
- Page 3 Ø8.0x30mm Wooden dowel Ø7x80mm Screw Ø7x60mm Screw Hex Key M4mm Glue tube Ø3.5x16mm Screw Ø7x30mm Screw W a l l A n c h o r Wall Anchor A Philip's Screwdriver (not included) is required to assemble this product. We do not recommend that power tools b used on this product.
- Page 4 Step 1 Insert dowel (A) with glue (E) into parts (1,3) Step 2 Attach part (1) to part (2) using screw (C) with hex key (D). Then attach part (3) to part (4) using screw (C) with hex key (D).
- Page 5 Step 3 Secure parts (5,6,7) to parts (1,2) using screw (C) and hex key (D). Ensure that cut-out on parts (6,7) are facing upward. Step 4 Attach parts (3,4) to parts (1,5) using screw (B) and hex key (D).
- Page 6 Step 5 Secure parts (5,6,7) to parts (1,2) using screw (C) and hex key (D). Step 6 Attach parts (3,4) to parts (1,5) using screw (B) and hex key (D).
- Page 7 Step 7 Secure pegs (9) to parts (6,7) using screw (G) and hex key (D).
- Page 8 Step 8 Attach part (8) to parts (5,6,7) using screw (F) and Philips Screwdriver.
-
Page 9: Back Panel
Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. 1º 2º Wall Back panel Ø6mm WARNING CHECK FOR HIDDEN PIPES AND CABLES BEFORE DRILLING...