Related Manuals for Walker Edison HT72EAST
Summary of Contents for Walker Edison HT72EAST
- Page 1 HT72EAST Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 23/07/2020(C) Walker Edison ® © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
-
Page 2: General Assembly Guidelines
A Phillips head screwdriver is required for the assembly of this product . VII. Power tools should not be used to assemble this product. VIII. Drill may be needed for securing product to wall. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 3: Parts List
Parts List © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 4: Hardware List
Glue tube Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Step 1 Insert wooden dowel (A) into part (2) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 Step 2 Using screw (E) attach part (3) into part (2) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 7 Step 3 Using Bolt (B) attach part (4) to part (3) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 8 Step 4 Using Bolt (F) attach part (5) to part (4) with Hex key (G) as per diagram. Note: Please do not fully tighten all bolts . © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 9 Secure Nut (H) into part (2) with Philips head screwdriver , then using bolt (D) attach part (5) to part (2) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 10 Step 6 using Bolt (F) attach part (5) to part (4) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.10...
- Page 11 Secure Nut (H) into part (2) with Philips head screwdriver , then using bolt (D) attach part (5) to part (2) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.11...
- Page 12 Step 8 Tear off the EVA pad (M) and place the pad on part (9) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.12...
- Page 13 Step 9 Attach parts(1,9) to part (5) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.13...
- Page 14 Step 10 Using bolt (B) attach parts (1,9) to part (5) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.14...
- Page 15 Step 11 Using bolt (F) attach part (9) to part (6) with Hex key (G) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.15...
- Page 16 Step 12 Using bolt (C) attach part (9) to part (8) with Hex key (G) as per diagram. Note: Do not fully tighten bolts . © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.16...
- Page 17 Step 13 Using bolt (B) attach part (8) to part (9) with Hex key (G) as per diagram. Note: Fully tighten all bolts. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.17...
- Page 18 Step 14 Place the part (7) as per diagram. © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.18...
- Page 19 Wall Using screw (J) attach Flat washer (K) into part (1) to nut (L) to wall with Philips head screwdriver as per diagram. © Copyright 2020 b Walker Edison Furniture Co., LLC. All rights reserved. P.19...
-
Page 20: Final Assembly
Step 16 Final Assembly © Copyright 2020, by Walker Edison Furniture Co., LLC. All rights reserved. P.20...