Advertisement
►Before connecting, reduce the volume level
►Avoid listening for prolonged periods of time to prevent hearing
damage.
► Plug type: 3.5 mm stereo
Listening to on external source
(See pages 16 and 18 for external unit connection.)
n P^'css INPUT SELECTOR to select the external
source.
Each time you press this button, sound sources will be switched
as follows.
TUNER-»CD-»TAPE-» EXT-* VCR^VDP-* PHONO
TUNER^CD^TAPE-*VCR (EXT)-*VDP (AUX)
t---I
Q Operate the unit which is connected to the
system.
Refer to your equipment's operating instructions.
This stereo has a built-in DOLBY PRO LOGIC circuit, so you can
enjoy the live sound of videos recorded in Dolby Surround (see
page 52).
Recording from an externai source
D
Foliow steps
a-D
on page 68.
WX
P^'6ss INPUT SELECTOR to select the external
source.
R Press # REC PAUSE to put the cassette deck
into the recording standby mode.
FI Press
<1
or [> to start recording.
H Start playing the source to be recorded.
Refer to your equipment's operating instructions.
To stop recording:
Press ■ on the cassette deck.
To briefly interrupt recording:
Press • REC PAUSE.
The cassette deck will go into the recording standby mode.
To resume recording:
Press < or > corresponding to the direction in which recording is
taking place.
Recording on an external unit
First, select the source with INPUT SELECTOR.
Start recording on an external unit, and then start playing the source
to be recorded.
•Sound field effects are recorded in the 3D PRESENCE (SH-EH60
only) and HALL modes, therefore be sure not to turn these modes
ON before or while recording on an external unit.
•Do not press KARAOKE when recording on an external unit.
Advertisement
