Download Print this page

Panasonic SC-EH60 Operating Instructions Manual page 38

System component
Hide thumbs Also See for SC-EH60:

Advertisement

PROGRAM
Disc number /
Programmed track number
Programmed order
CANCEL
This function allows you to program up to 24 tracks.
n Press CD.
Q Press PROGRAM.
Q Press DISC.
FI (within 10 seconds or so)
Press DISC 1 -5, whichever disc you want.
Q Press the numeric button(s) to select the track
you want to play in the desired sequence.
To select a two-digit track;
Press ilO and then the two numbers you want.
n Repeat steps Q through Q until you have pro¬
grammed all the tracks you want.
Q Press P-.
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks
have been played.
To cancel program play mode:
Press PROGRAM.
"CLEAR" will appear on the display for approximately 1 second and
all the programmed tracks will be cancelled.
When "FULL" appears:
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
When "—:—" appears:
The total playing time of the programmed tracks has exceeded
99 minutes 59 seconds, or you tried programming track which is
numbered 25 or more, or you tried programming a disc not in play¬
ing position. In any case, you can still program and play discs.
You can do the following during program play. El
•Check program contents.
1. Press CANCEL.
"CANCEL" will light.
2. Press
or
►►/►►I
on the CD changer, Every time you
press one of the buttons, the track and program No. are shown
on the display.
3. After the total playing time appears on the display, press
CANCEL. "CANCEL" goes out.
•Add to the program.
Repeats steps Q through Q.
•Cancel entries.
A specific track only:
(D Press CANCEL. "CANCEL" will light.
(|) Press the numeric button(s) of the track you want to cancel, or
press
or ►►/►►! on the CD changer to select the
track you want to cancel and then press CANCEL.
(3) Press CANCEL once again. "CANCEL" goes out.
All tracks:
Press PROGRAM, or press ■ while play is stopped.
For your reference:
•To program the track you are listening to:
If you press PROGRAM during playback, the program mode will
engage and the current playback track will be automatically re¬
corded as program No. 1.
Program play

Advertisement

loading

This manual is also suitable for:

Sc-eh50