Basket Removal - Baby Jogger eco city mini GT2 Assembly Instructions Manual

EN WARNING: Avoid serious injury from
falling or sliding out. Always properly
adjust and fasten safety harness.
WARNING: Always use the crotch
strap in combination with the shoulder
straps and waist belt.
21 Slide the harness pads up to access
plastic guide on strap.
22 Hold the plastic guide and pull strap to
tighten or loosen.
USING SAFETY HARNESS
23 Insert side strap buckle into harness
buckle on both sides.
24 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
25 Press button on crotch buckle to
release.
RECLINE THE SEAT
26 Pinch the clamp behind the seat, and
slide it down to desired recline.
27 Pull seat down on both sides to match
the clamp position. Reverse steps to
return to the upright position.
WARNING: When making adjustments
to the stoller seat, make sure child' s
head, arms, and legs are clear of
moving seat parts and stroller frame.
28 For extra ventilation, roll up the seat
back flap and secure with elastic and
button.
LEG SUPPORT
29 To use the leg support, lift the front of
the seat pad.
30 Rotate the support arm out and lower
the seat pad. Lock the support arm.
31 To lower leg support, reverse the steps.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all items
from basket.
WARNING: To prevent injury, remove
child tray or belly bar accessory when
folding or unfolding the stroller.
32 Press buttons on both sides of frame.
Rotate handle up.
33 Pull up on the "Pull to Fold" folding
handle and let the frame colapse.
34 Make sure the auto-lock lever clicks
into place.
35 Place stroller upright in standing
position.

BASKET REMOVAL

36 From the front of the stroller, unsnap
the 2 snaps and pull the straps out of
the foot well.
37 Lift basket off the hook.
38 From the back, lift the top of the basket
off the tab on both sides of the frame.
39 Unsnap the strap from the D ring on
both sides of the frame.
REMOVING THE SEAT FABRIC
40 Flip the stroller over to expose the seat
bottom.
A Unfasten the 2 fastening strips and pull
them out of the stroller frame.
B Unfasten the fastening strip and pull
them out of the sides of the stroller
frame.
C Unscrew both carabiner hooks and
remove them from the stroller frame.
41 From beneath the stroller, unsnap
tether strap on the side.
42 Flip the seat back over on its wheels.
Unsnap both upper snaps from the
stroller frame.
43 Starting from the bottom, slide the
seat pad out from the stroller frame on
both sides.
44 From the top, slide the seat pad out of
the frame on both sides.
45 Remove seat fabric.
Reverse the steps to reattach the seat pad
to the frame.
ACCESSORIES
BELLY BAR
46 To install, pull the fabric on both sides
of the stroller frame to expose the belly
bar mount and slide belly bar down
the mount until it clicks.
16