Leg Support; Basket Removal; Removing The Seat Pad - Baby Jogger City Elite 2 Assembly Instructions Manual

WARNING: Avoid serious injury from
falling or sliding out. Always properly
adjust and fasten safety harness.
WARNING: Always use the crotch
strap in combination with the shoulder
straps and waist belt.
21 Slide the harness pads up to access
plastic guide on strap.
22 Hold the plastic guide and pull strap to
tighten or loosen.
USING SAFETY HARNESS
23 Insert side strap buckle into harness
buckle on both sides.
24 Insert connected harness and side
strap buckles into the sides of the
crotch buckle.
25 Press button on crotch buckle to
release.
RECLINE THE SEAT
26 Pinch the clamp behind the seat, and
slide it down to desired recline.
27 Pull seat down on both sides to match
the clamp position. Reverse steps to
return to the upright position.
WARNING: When making adjustments
to the stroller seat, make sure child' s
head, arms, and legs are clear of
moving seat parts and stroller frame.
28 For extra ventilation, roll up the seat
back flap and secure with elastic and
button.

LEG SUPPORT

29 To use the leg support, lift the front of
the seat pad.
30 Rotate the support arm out and lower
the seat pad. Lock the support arm.
31 To lower leg support, reverse the steps.
FOLDING
• Remove your child from the seat.
• Disengage front wheel swivel locks.
• Remove all attachments and all items
from basket.
32 Press buttons on both sides of frame.
Rotate handle up.
WARNING: To prevent injury, remove
Child Tray or Belly Bar accessory when
folding or unfolding the stroller.
33 Insert index finger into small loop, pull
up on the "Pull to Fold" folding handle,
and let the frame colapse.
34 Make sure the auto-lock lever clicks
into place.
35 Place stroller upright in standing
position.

BASKET REMOVAL

36 From the front of the stroller, unsnap
the 2 snaps and pull the straps out of
foot well.
37 Lift basket off the hook.
38 From the back, lift the top of basket off
the tab on both sides of frame.
39 Remove the strap from the C clamp
on both sides of frame.

REMOVING THE SEAT PAD

40 Flip the stroller over to expose the seat
bottom.
A Unfasten the 2 fastening strips and
pull then out of the stroller frame.
B Unfasten the fastening strip and pull
them out of the sides of the stroller
frame.
C Unscrew the right carabiner hook
and pull strap out from the seat pad.
41 Flip the seat back over on its wheels.
Pull seat fabric up and off of buttons.
42 Starting from the bottom, slide the seat
pad out from stroller frame on both
sides.
43 From the top, slide the seat pad out of
the frame on both sides.
44 Remove seat pad.
Reverse the steps to reattach the seat pad
to the frame.
13
EN