Compliance And Safety Information - Cisco CQ211L01-48H8FH Hardware Installation Manual

Compliance and Safety Information

• Keep the work area clear, smoke and dust-free during and after installation. Do not allow dirt or debris
• Do not wear loose clothing, jewelry, or other items that could get caught in the router or other associated
• Cisco equipment operates safely when used in accordance with its specifications and product-usage
• If potentially hazardous conditions exist, do not work alone.
• Take care when connecting multiple units to the supply circuit so that wiring is not overloaded.
• This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
• When installing or replacing the unit, the ground connection must always be made first and disconnected
• To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
• Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when
Compliance and Safety Information
The
For detailed safety information, see
Warning
Warning
Warning
to enter into any laser-based components.
components.
instructions.
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain about whether suitable grounding is available.
last.
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to
support the weight of the unit.
servicing.
are designed to meet the regulatory compliance and safety approval requirements.
.
Statement 1089—Instructed and Skilled Person Definitions
An instructed person is someone who has been instructed and trained by a skilled person and takes the necessary
precautions when working with equipment.
A skilled person or qualified personnel is someone who has training or experience in the equipment technology
and understands potential hazards when working with equipment.
Statement 1004—Installation Instructions
Read the installation instructions before using, installing, or connecting the system to the power source.
Statement 9001—Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Regulatory Compliance and Safety Information—Cisco
Hardware Installation Guide for Cisco CQ211L01 Switch
Prepare for Installation
3