Related Manuals for Maxtor MTF22 Series
Summary of Contents for Maxtor MTF22 Series
- Page 1 INSTALLATION MANUAL MTF22 series We reserves the right to improve the product's appearance, size and technology without prior notice. All products sizes and colors are subject to the actual product...
-
Page 2: Installation
Preparation before installation Installation of different walls WOODEN WALL PREPARATION Make sure LED mirror (or Medicine cabinet) be mounted on the reinforcement plate. PRECAUTIONS All vanities must be installed by a fully qualified plumber. Vanities and tops must be installed onto finished surfaces. It is imperative that all bathroom installations are ventilated to meet standards. -
Page 3: Electric Connections
Specication & Installation Guide ELECTRIC CONNECTIONS ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN CABINET INSTALLATION WARNING: Shut off power before wiring the mirror. STEP 1 WARNING: An Electrical option mirror must be wired to a 20 Amp GFl(Ground Fault Interrupter) protected circuit when used in bathrooms Intall the basin and glue. -
Page 4: Faucet Installation
MIRROR MOUNT FAUCET INSTALLATION For first time install, flush the pipes first byopen the angel valve to run 60s. STEP 1 STEP 2 STEP 1 STEP 2 Placment Support location Clean and wipe the countertop and check if it is Remove the mounting hardware from Select the desired position of the mirror. -
Page 5: Drawer Assembly
POP-UP WASTE INSTALLATION DRAWER ASSEMBLY STEP 1 lnstall Pop-up Waste with over flow Lay the drawer bottom onto the slide then push thedrawer into the cabinet. Removal with Locking Device For removal, hold the handle and pull out the drawer. STEP 2 Connect the drain pipe Drawer up &... -
Page 6: Door Remove
HINGE ADJUSTMENT AND REMOVAL INSTRUCTION DOOR INSTALL PIVOT-PRO side adjustment Side adjustment of the door is made by using the indicated screw. PIVOT-PRO Depth Adjustment Depth adjustment is made without loosening any screw.The door can be moved in or outby rotating the cam adjuster on the hinge arm. Snap-on cam-adjustable DOOR REMOVE... -
Page 7: Troubleshooting
Cleaning and Warranty TROUBLE SHOOTING What happens if my soft close drawer is not closing properly? It means that your soft close drawer is not engaged correctly. Follow the instructions on page 03 to re-engage the soft close mechanism. General Cleaning Aquas Bath products are made from materials or sourced specifically for bathroom and laundry spaces.