HINGE ADJUSTMENT AND REMOVAL INSTRUCTION
PIVOT-PRO side adjustment
Side adjustment of the door is made by using the indicated screw.
PIVOT-PRO Depth Adjustment
Depth adjustment is made without loosening any screw.The door can be
moved in or outby rotating the cam adjuster on the hinge arm.
PIVOT-PRO Height Adjustment
By loosening the two fixing screws to allow the mounting plate to slide up or down
,the door can be adjusted vertically by ±2mm.After retightening the screws, the
depthadjustment is done.
9
Snap-on
cam-adjustable
DOOR INSTALL
DOOR REMOVE
10