Subscribe to Our Youtube Channel
Related Manuals for Maxtor MTC22 Series
Summary of Contents for Maxtor MTC22 Series
- Page 1 INSTALLATION MANUAL MTC22 series We reserves the right to improve the product's appearance, size and technology without prior notice. All products sizes and colors are subject to the actual product...
-
Page 2: Tools Required For Installation
Preparation before installation Product size chart PRECAUTIONS All vanities must be installed by a fully qualified plumber. Vanities and tops must be installed onto finished surfaces. It is imperative that all bathroom installations are ventilated to meet standards. V22060DW VANITY SIDE MT01060S MR024DS Failure to provide ventilation that meets these standards will void the... -
Page 3: Cabinet Installation
Installation of different walls Specication & Installation Guide CABINET INSTALLATION WOODEN WALL PREPARATION Make sure LED mirror (or Medicine cabinet) be mounted on the STEP 1 reinforcement plate. Intall the basin and glue. 2"x4" [50x100mm] Wood Reinforcement 35'' [890mm] Wood STEP 2 Reinforcement 2"x8"... -
Page 4: Electric Connections
ELECTRIC CONNECTIONS MIRROR MOUNT STEP 1 STEP 2 ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN Placment Support location WARNING: Shut off power before wiring the mirror. Select the desired position of the mirror. Measure the center of the holes and mark the Level and mark the location. -
Page 5: Faucet Installation
FAUCET INSTALLATION POP-UP WASTE INSTALLATION For first time install, flush the pipes first byopen the angel valve to run 60s. STEP 1 STEP 2 STEP 1 Clean and wipe the countertop and check if it is Remove the mounting hardware from level. -
Page 6: Drawer Assembly
DRAWER ASSEMBLY HINGE ADJUSTMENT AND REMOVAL INSTRUCTION PIVOT-PRO side adjustment Side adjustment of the door is made by using the indicated screw. Lay the drawer bottom onto the slide then push thedrawer into the cabinet. PIVOT-PRO Depth Adjustment Removal with Locking Device Depth adjustment is made without loosening any screw.The door can be moved in or outby rotating the cam adjuster on the hinge arm. - Page 7 HINGE ADJUSTMENT AND REMOVAL INSTRUCTION DRAWER ASSEMBLY PIVOT-PRO side adjustment Side adjustment of the door is made by using the indicated screw. Lay the drawer bottom onto the slide then push thedrawer into the cabinet. PIVOT-PRO Depth Adjustment Removal with Locking Device Depth adjustment is made without loosening any screw.The door can be moved in or outby rotating the cam adjuster on the hinge arm.
-
Page 8: Troubleshooting
TROUBLE SHOOTING DOOR INSTALL What happens if my soft close drawer is not closing properly? It means that your soft close drawer is not engaged correctly. Follow the instructions on page 03 to re-engage the soft close mechanism. Why is my soft close drawer making a noise on closing, and not closing smoothly? If the release tabs on the drawer are not lifted properly, then this may cause the cog to strip on the soft close mechanism. -
Page 9: Cleaning And Warranty
Cleaning and Warranty General Cleaning Aquas Bath products are made from materials or sourced specifically for bathroom and laundry spaces. Our vanities and cabinetry are designed to be water resistant, not waterproof. Care must be taken to immediately dry spillage as well as ventilate your bathroom to eliminate moisture build up or humidity which will lead to deterioration of materials and is not covered by warranty.
Need help?
Do you have a question about the MTC22 Series and is the answer not in the manual?
Questions and answers