Onboard Vehicle Tool Kit; Front Wheel Stand - BMW Motorrad R 1300 GS 2024 Rider's Manual

ONBOARD VEHICLE TOOL
KIT
1 Screwdriver handle
Use with screwdriver
insert
2 Reversible screwdriver
insert
with Phillips and slotted
blade
Disconnecting battery
from motorcycle.
( 221)
3 Torx wrench, T25/T30
T25 on short end, T30 on
long end
Remove right side trim
panel. (
Adjust the gearshift
lever foot plate.
( 138)
Adjust the headlight
range. (
4 Open-ended wrench
Key range: 14 mm
216)
137)
4 without dynamic
suspension adjust-
ment OE
Setting rear spring
preload. (
Adjust the mirror arm.
( 136)

FRONT WHEEL STAND

Installing front wheel stand
ATTENTION
Use of BMW Motorrad front
wheel stand without addi-
tional center or auxiliary
stand
Component damage cause by
tipping over
Place the motorcycle on a
center or auxiliary stand be-
fore lifting the front wheel
with the BMW Motorrad
front-wheel stand.
Ensure that the motorcycle is
standing securely.
Put the motorcycle
on an auxiliary stand;
BMW Motorrad recommends
the BMW Motorrad rear-
wheel stand.
Attach the rear-wheel stand.
( 196)
195
143)