Table of Contents
Advertisement
1.12 Handling
Manual handling of large and / or heavy products may present a risk of injury. Lifting, pushing,
pulling, carrying or supporting a load by bodily force can cause injury particularly to the back.
You are advised to assess the risks taking into account the task, the individual, the load and the
working environment and use the appropriate handling method depending on the circumstances
of the work being done.
1.13 Residual hazards
In normal use the external surface of the product may be very hot. If used at the maximum
permitted operating conditions the surface temperature of some products may reach temperatures
of 300 °C (572 °F).
Many products are not self-draining. Take due care when dismantling or removing the product from
an installation (refer to 'Maintenance instructions').
1.14 Freezing
Provision must be made to protect products which are not self-draining against frost damage in
environments where they may be exposed to temperatures below freezing point.
1.15 Disposal
This product is recyclable. No ecological hazard is anticipated with the disposal of this product
providing due care is taken, except:
Viton seat:
-
Waste parts can be landfilled, when in compliance with National and Local regulations.
-
Parts can be incinerated, but a scrubber must be used to remove Hydrogen Fluoride, which is
evolved from the product and with compliance to National and Local regulations.
-
Parts are insoluble in aquatic media.
Please visit the Spirax Sarco product compliance web pages:
https://www.spiraxsarco.com/product-compliance
for up to date information on any substances of concern that may be contained within this product.
Where no additional information is provided on the Spirax Sarco product compliance web page,
this product may be safely recycled and/or disposed providing due care is taken.
Always check your local recycling and disposal regulations.
1.16 Returning products
Customers and stockists are reminded that under EC Health, Safety and Environment Law, when
returning products to Spirax Sarco they must provide information on any hazards and the precautions
to be taken due to contamination residues or mechanical damage which may present a health,
safety or environmental risk. This information must be provided in writing including Health and
Safety data sheets relating to any substances identified as hazardous or potentially hazardous.
1.17 DCV41 Food+ version, safety instructions
This product is intended to be connected into a system that can operate an EC1935 compliant process.
To minimise the risk of non-intentionally added substances in the system, it is essential that an
appropriate CIP (cleaning in place) cycle is carried out by the end user prior to first use in a food
contact application.
A list of the materials that could come directly or indirectly into contact with foodstuffs can be
found in the Declaration of Compliance available for this product.
DCV41 and DCV41 Food+ Austenitic Stainless Steel Disc Check Valve
4
IM-P601-19 CMGT Issue 8
Advertisement
Table of Contents
