Paradyne Comsphere 3830 User Manual page 74

S76 V.32 bis Autorate (Dial Line)
Determines if the Autorate function is used on dial lines when connected
in V.32 bis mode. Autorate allows the modem to adjust line speed due to
noise.
Register has the following values:
0 = Enable
1 = Disable
2 = Start at 4800 bps
3 = Start at 9600 bps
Factory setting is Enable.
S77 DTR Alarm Reporting
Register determines whether an alarm is sent to the 6800 Series Network
Management System controller when the DTR signal has been Off for
more than 10 seconds.
Register has the following values:
0 = Disable
1 = Enable
3830-A2-GB91-20
Table 4-3
(11 of 15)
Model 3830 S-Registers
November 1996
4. AT Command Set and S-Registers
4-39