Paradyne Comsphere 3830 User Manual page 67

COMSPHERE 3800 Series Modems – Model 3830
S36 Rate Auto Originate
Initiates a dial backup call, using the phone number in directory location
1, when the leased-line rate of the modem falls back to or below a certain
speed.
Register has the following values:
0 = Disable
1 = On fallback to 4,800
2 = On fallback to 7,200
3 = On fallback to 9,600
4 = On fallback to 12,000
5 = On fallback to 14,400
6 = On fallback to 16,800
NOTE: Rate Auto-Originate is valid only when V.32 bis Autorate is
enabled (S76=0).
S37 Auto Redial
Works in conjunction with the Bad Lines Auto Originate and Rate Auto
Originate options. It allows repeated automatic dial backup attempts by
specifying the range of Directory Locations that can be tried. The modem
must be in Originate mode.
Register has the following values:
0 = Use Directory Location 1
1 = Use Directory Locations 1–2
2 = Use Directory Locations 1–3
3 = Use Directory Locations 1–4
9 = Use Directory Locations 1–10
NOTE: The modem must be in Originate mode to perform an automatic
dial backup.
4-32
Table 4-3
(4 of 15)
Model 3830 S-Registers
November 1996 3830-A2-GB91-20