Table of Contents
Advertisement
Image
Option
Contrast
Brightness
Keystone
Aspect Ratio
Actions/Descriptions
Controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast
changes the amount of black and white in the image.
Select the desired setting with the
Press the
button to decrease the contrast.
Press the
button to increase the contrast.
Adjusts the brightness of the image.
Select the desired setting with the
Press the
button to lighten the image.
Press the
button to darken the image.
Adjusts image distortion caused by tilting the projector.
Select the desired setting with the
Press the
button to reduce the upper width.
Press the
button to reduce the lower width.
Selects this function to fit 1:1, 16:9, 4:3 aspect ratio. In
order to use the 1:1 aspect ratio, the input must be a
computer signal (through VGA cable) of resolution less
than SVGA (800 x 600). If the input signal is a computer
signal greater than SVGA or component 1080i / 720p,
only 16:9 or 4:3 aspect ratio will be available.
English
/
buttons:
/
buttons:
/
buttons:
EN-25
Advertisement
Table of Contents
