0631 [Output Trail Edge Press Setting]
Set whether or not to hold the trailing edge of sheets when ejected on the Shift Tray. Setting it [On]
reduces the dispersion of paper due to the paper type and paper condition.
This function can be used with Finisher or Booklet Finisher.
Setting Item
[Setting]
0632 [Output Fan Setting]
Set the fan operation to the sheets on the shift tray. Air blowing peels off the sheets in close contact.
This function can be used with Finisher or Booklet Finisher.
Setting Item
[Setting]
0633 [Output Fan Level]
Adjust the fan volume to the sheets on the shift tray. Increase the air level if the sheets are in close
contact.
This function can be used with Finisher or Booklet Finisher.
Setting Item
[Setting]
0634 [Maximum Number of Stacked Sheets in Output Tray]
Set the number of sheets for each paper size to be output and stacked on the Shift Tray.
This function can be used with Finisher or Booklet Finisher.
Values
[Auto]
[On]
[Off]
Values
[Auto]
[On]
[Off]
Values
[Standard]
[Increase Air Volume]
[Finishing: Finisher]
Default Value
[Auto]
Default Value
[Auto]
Default Value
[Standard]
51