3. Details of Detailed Settings
When to use
Set this to [On] if paper misfeeds frequently occur immediately after the paper is fed.
Tray Elevation Assist(Assist Mode)
1303 [2-Tray LCIT: Other Settings]
Function
Specify the operation to assist raising the bottom plate according to paper thickness.
When to use
If paper misfeeds frequently occur when the paper almost runs out, set this to [Assist On When
Remaining Paper Low]. If paper misfeeds frequently occur regardless of the remaining paper, set
this to [Always Assist On].
Related Troubleshooting
• Double Feeding
• Paper Misfeeds
For detailed procedure, see the Troubleshooting manual.
Tray Elevation Assist(Paper Thickness)
1303 [2-Tray LCIT: Other Settings]
Function
Specify the paper thickness to apply when the assist mode in [Tray Elevation Assist] is set to On.
When to use
If paper misfeeds persist even after setting the assist mode to On, enter the measured paper
thickness. If the entered paper thickness is not appropriate, paper misfeeds or double-feeding
paper jams may occur.
Related Troubleshooting
• Double Feeding
• Paper Misfeeds
For detailed procedure, see the Troubleshooting manual.
Tray Elevation Assist(Speed)
1303 [2-Tray LCIT: Other Settings]
50
[Tray Elevation Assist]
Assist Mode
[Tray Elevation Assist]
Paper Thickness
[Tray Elevation Assist]
Speed