Table of Contents
Advertisement
Advanced Operational Modes
New functionality has been introduced to Version 3 of the product to allow for Sets.
Sets allow for two groups of up to 4 DSC/DLC devices to be configured. Additionally the two sets can be used to
produce a Result known as FinAL.
Advanced mode is entered by selecting 5 (Sets) in the FUNC parameter.
When using advanced mode the Station Numbers must be defined using parameters IST1 to IST8. Station numbers
can be in the range of 1 to 252. If the ISTx is set to zero then this input is not included in the set
SEt1 is comprised of InP1 to InP4
SEt2 is comprised of InP5 to InP8
Advanced Button Function
System Zero for Legacy and Advanced
Once the module is installed it may be necessary to perform a system zero. To do this power off the DS485DIS and
hold down key
and re-apply the power. The display will show "ZErOEd" and the key can now be released.
The system zero can be re-applied at any time. Performing this will reset to Gross mode.
To remove the system zero the communication interface must be used.
Mantracourt Electronics Limited – DS485DIS User Manual
Toggles between Gross Result and Net Result. When switching from Gross to Net
display a tare is performed.
This key is only active when displaying the FInAL which is indicated by the Result LED
being on.
Selects next item to view.
When displaying FInAL, indicated by Result LED being on, pressing this key will show
SEt1. After a 3 second timeout the value for SEt1 will be displayed. A further press will
show SEt2 followed 3 seconds later by the value for SEt2. The next press returns the
display to showing FInAL which is the result of SEt1 and SEt2.
Notes.
Key presses whilst the display shows mnemonics SEt1 or SEt2 will be ignored.
Pressing and holding this key when displaying the FInAL indicated by the Result LED
being on will cause the Result LED to turn off (approx. 3 seconds) and put the display
into a mode that allows the individual inputs that make up the sets to also be
displayed.
Pressing this key whilst mnemonics InPx is displayed will skip to the next input
without showing the value of InPx. This is a quick way of stepping around the inputs.
8
Advertisement
Table of Contents
