Advertisement
Installing the Bracket on a Wall or Desk
Procedure
To attach the mounting bracket to a wall or to the side or underside of a desk:
1. Hold the CPE and bracket in the desired location and mark the hole positions.
2. In hardwood or steel surfaces, drill 5/64-inch (2-mm) pilot holes at the marked hole
positions.
3. For vertical mounts, it may be difficult to connect cables after the CPE is fastened.
In such cases connect the cables to the CPE before fastening it to the wall or desk.
4. Fasten the bracket using the two supplied 1/2-inch (13-mm) #6 screws. Use screw
anchors (not provided) in drywall or other soft materials.
2
Advertisement
