Resetting The Lamp Timer - Epson MovieMate 50 User Manual

6. Gently insert the new lamp and tighten its screws.
Caution: Don't touch the glass portion of the lamp with your bare hands; the invisible residue
left by the oil on your hands may shorten the lamp life. Use a cloth or gloves to handle the new
lamp assembly.
7. To replace the lamp cover, slide it into position, then tighten the screw. (MovieMate
won't work if the lamp cover is loose.)
8. After replacing the lamp, you need to reset the lamp timer, as described in the next
section.

Resetting the Lamp Timer

1. Connect the power cable and press the
2. Press
3. Press
4. Press
5. Select
Yes
46
Caring for Your Epson MovieMate
on the remote control. You see the Visual Setup menu.
to highlight , then press
Info
again. You see the following on the screen:
and press to reset the timer.
button to turn MovieMate on.
to select it.