Epson MovieMate 50 User Manual page 53

■
If the picture looks darker than it used to, you may need to replace the lamp. See page 44.
The colors on the screen don't look right.
■
Press the button on the remote control to select the best setting for your viewing
environment.
■
Adjust the
Color Saturation
■
If you're using external video equipment, check the solutions on page 54.
The picture is wider at the top or bottom.
■
You've tilted MovieMate to raise or lower the image, causing it to become "keystoned."
Use the or
problem.
The picture is taller on the left or right side.
MovieMate is set at an angle to the screen. Face it squarely toward the screen.
There is no sound, or the sound is not loud enough.
■
Try pressing the
+ Volume
■
Press the button on the remote control to make sure the sound hasn't been turned
off temporarily.
■
If you're using external video equipment, make sure you connected the red and white
audio jacks to MovieMate's audio ports (see page 21).
■
If you're using external equipment, you may need to adjust the Audio settings in the
setup menu (see page 39).
There is a problem with the sound quality.
■
Try pressing the
■
If you're using external equipment, you may need to adjust the Audio settings in the
setup menu (see page 39).
Subtitles do not appear.
■
The DVD might not include subtitles.
■
Make sure the subtitle language is not set to
or settings. See page 37.
Tint
buttons on the control panel or remote control to correct the
button on MovieMate or on the remote control.
button on the remote control and adjusting the sound mode.
(see page 32).
OFF
53
Problem Solving