Paradyne 3161 Quick Reference page 8

Factory default configuration options are shown in boldface type in the following tables.
Table 1. DTE Interface Configuration Options
Option Factory 1
DTE Port: DTE Port:
DTE Framing: DTE Framing:
DTE Coding: DTE Coding:
Equal: Equal:
( (DTE Line
Equalizer) Equalizer)
Extrn DLB:
(External DTE (External DTE
Loopback)
Send Ones: Send Ones:
Table 2. Port Configuration Options (1 of 3)
Option Factory 1
Port Type: Port Type:
Base Rate: Base Rate:
Factory 2
Enab Enab
Disab Disab
D4 D4
ESF ESF
AMI AMI
B8ZS B8ZS
0–133 0–133
133–266 133–266
266–399 266–399
399–533 399–533
533–655 533–655
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Factory 2
E530 E530
V.35 V.35
RS449 RS449
X.21 X.21
Nx64 Nx64
Nx56 Nx56
6
Comments/Description
Enables the use of the DTE Enables the use of the DTE
Drop/Insert port.
Selects D4 or ESF framing format. Selects D4 or ESF framing format
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
Provides selectable extended DTE
range capability. range capability.
Allows control of DLB on external Allows control of DLB on external
contact closure.
Sends all ones on channels
allocated to the network T1 on allocated to the network T1 on
LOS, LOF, or AIS.
Comments/Description
Selects the port type: EIA-530A, Selects the port type: EIA-530A,
V.35, RS449, or X.21.
Enables the port to either Nx56 or Enables the port to either Nx56 or
Nx64 rates.