Table 8. Alarm Configuration Options
Option
Factory 1
Alrm Msg:
Alrm Msg:
SNMP Trap:
SNMP Trap:
TrapDisc:
TrapDisc:
DialOut:
DialOut:
Call Retry:
Call Retry:
Dial Delay:
AltDialDir:
Err Rate:
(Excessive Error
(Excessive Error
Rate)
a e)
AlrmRelay:
AlrmRelay:
(Alarm Relay)
Factory 2
Disab
Disab
Com
Com
Enab
Enab
Disab
Disab
Enab
Enab
Disab
Disab
Enab
Enab
Disab
Disab
Enab
Enab
Disab
Disab
1–4
1–4
5
5
6–10
6–10
None
None
1–5
1–5
10E–4
10E–4
10E–5
10E–5
10E–6
10E–6
10E–7
10E–7
10E–8
10E–8
10E–9
10E–9
Enab
Enab
Disab
Disab
15
Comments/Description
Does not display alarm messages.
Sends alarm messages to COM
port.
Sends SNMP traps.
Sends SNMP traps
Specifies whether the modem
p
connection will disconnect after a
connection will disconnect after a
trap is sent.
Provides the option to allow
automatic dial-out to send alarm
automatic dial-out to send alarm
messages on MODEM port.
Specifies whether an outgoing call
is retried on a busy or failed call
is retried on a busy or failed call
attempt.
The time (in minutes) to delay
between successive alarm
dial-outs or retry attempts.
The alternate dial-out directory to
use if a call to the primary number
cannot be completed.
The error rate threshold for
Excessive Error Rate Alarm.
Excessive Error Rate Alarm
Specifies whether to activate the
Specifies whether to activate the
alarm relay on an alarm condition.