Paradyne 3161 Quick Reference page 16

Table 7. User Configuration Options (3 of 3)
Option Factory 1
CParity: CParity:
( (Communication Port
Parity) Parity)
CStop Bits: CStop Bits:
( (Communication Port
Stop Bits) Stop Bits)
Ignore DTR: Ignore DTR:
CmInActTm:
(COM Port Inactivity (COM Port Inactivity
Timeout)
CmDiscTm:
(COM Port (COM Port
Disconnect Time)
TnSession: TnSession:
(Telnet Session)
TnPaswd: TnPaswd:
(Telnet Password)
TnInActTm:
(Telnet Inactivity (Telnet Inactivity
Timeout)
TnDiscTm:
(Telnet Disconnect
(Telnet Disconnect
Time)
Factory 2
None None
Even Even
Odd Odd
1 1
1.5 1.5
2 2
Yes Yes
No No
Enab Enab
Disab Disab
5 5
Up Up
Down Down
Save Save
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Enab Enab
Disab Disab
5 5
Up Up
Down Down
Save Save
14
Comments/Description
Selects the parity for the COM port.
Selects the number of stop bits for
the COM port. the COM port.
Specifies whether the COM port Specifies whether the COM port
ignores DTR.
Specifies whether the p
communication port disconnects communication port disconnects
after a certain period of inactivity.
Specifies the period of inactivity
(1 to 60 minutes) that causes a (1 to 60 minutes) that causes a
disconnect if CmInActTm is
enabled. enabled.
Specifies whether the DSU/CSU p
responds to Telnet session responds to Telnet session
requests.
Specifies whether a password is Specifies whether a password is
required for Telnet sessions.
Specifies whether a Telnet session p
disconnects after a certain period disconnects after a certain period
of inactivity.
The period of inactivity (1 to
60 minutes) that causes a 60 minutes) that causes a
disconnect if TnInActTm is
enabled. enabled.