Paradyne 3160 Quick Reference page 16

Table 8. Alarm Configuration Options
Option Factory 1
Al Alrm Msg: M
SNMP Trap: SNMP Trap:
TrapDisc: TrapDisc:
DialOut: DialOut:
Call Retry: Call Retry:
Dial Delay:
AltDialDir:
Err Rate:
(Excessive Error (Excessive Error
Rate) Rate)
Factory 2
Disab Disab
Modem Modem
Com Com
Both Both
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Enab Enab
Disab Disab
1–4 1–4
5 5
6–10 6–10
None None
1–5 1–5
10E–4 10E–4
10E–5 10E–5
10E–6 10E–6
10E–7 10E–7
10E–8 10E–8
10E–9 10E–9
14
Comments/Description
Does not display alarm messages.
Sends alarm messages to modem
port.
Sends alarm messages to COM
port.
Sends alarm messages to both
modem and COM ports.
Sends SNMP traps. Sends SNMP traps
Specifies whether the modem p
connection will disconnect after a connection will disconnect after a
trap is sent.
Provides the option to allow p
automatic dial-out to send alarm automatic dial out to send alarm
messages on MODEM port.
Specifies whether an outgoing call p g g
is retried on a busy or failed call is retried on a busy or failed call
attempt.
The time (in minutes) to delay
between successive alarm
dial-outs or retry attempts.
The alternate dial-out directory to
use if a call to the primary number
cannot be completed.
The error rate threshold for
Excessive Error Rate Alarm. Excessive Error Rate Alarm