Paradyne 9161 Quick Reference page 3

Network
Configuration Option
Network
1
Interface Status
Line Framing Format
Line Coding Format
Line Build Out (LBO)
Bit Stuffing
Network Initiated LLB
Network Initiated PLB
3
Transmit Timing
ANSI Performance Report
Messages
Management Link
2
IP Address
Subnet Mask
Routing Information Protocol
Network Time Slot
Circuit Identifier
Loss of Signal (LOS) Alarm
Out of Frame (OOF) Alarm
Alarm Indication Signal (AIS)
Yellow Alarm
Excessive Error Rate (EER)
Alarm
Excessive Error Rate Threshold
1
Read-only when Network is set to 1.
2
This first byte cannot be set to 0 nor 127. However, the null address of 0.0.0.0 is
valid after performing a Clear.
3
Only shown when 9261 T1 NAM is being used.
Settings
1, 2
Enable, [Disable]
D4, [ESF]
AMI, [B8ZS]
[0.0], –7.5, –15, –22.5
[62411], Part68, Disable
[Enable], Disable
[Enable], Disable
[System], Network
Enable, [Disable]
[Disable], FDL, DDL
[000.000.000.000] – 223.255.255.255, Clear
[000.000.000.000] – 255.255.255.255, Clear
None, [Proprietary]
01–24 [lowest available time slot]
Text field
[Enable], Disable
[Enable], Disable
[Enable], Disable
[Enable], Disable
[Enable], Disable
[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
3
Default in [Bold]