Table of Contents
Advertisement
Initial Startup
After the installation is complete, follow the steps below to start up the EVSE:
1. Ensure the EVSE is properly installed and securely mounted.
2. Confirm that the emergency stop button is in the released position. If not, rotate
once to release.
3. Turn on the AC power supply.
4. The LCD screen will display the startup animation and then show the current
charging status.
5. Once the startup sequence is complete, the EVSE is ready for use.
⚠
Important
If the EVSE fails to start up, please check the power supply, wiring, and connections
before contacting a qualified electrician or technician for assistance.
16
Advertisement
Table of Contents
Need help?
Do you have a question about the EV Series and is the answer not in the manual?