Verification - MSI EV Series User Manual

Verification

After completing the installation and initial startup, it is important to verify that the
EVSE is functioning properly. Follow the steps below to perform a verification check:
1. Connect an electric vehicle to the EVSE and ensure that it is properly connected
and charging.
2. Monitor the LCD screen on the EVSE to ensure that it is displaying the correct
charging status and that there are no error messages.
3. Check the charging rate to ensure that it is consistent with the vehicle's
specifications.
4. Test the emergency stop button to ensure that it interrupts the charging process
as expected.
5. Verify that the AC power supply and wiring are properly installed and rated for the
EVSE's electrical requirements.
⚠
Important
If any issues are found during the verification process, consult the user manual or
contact technical support for further assistance. It is important to ensure that the
EVSE is operating safely and correctly to prevent damage to the charger or the electric
vehicle.
17