Operation; Charging Procedures - MSI EV Series User Manual

Operation

After the initial setup and verification, the EVSE is ready to use. To operate the EVSE,
follow the steps below:
1. Connect your electric vehicle to the EVSE.
2. If you have an LCD display model, the screen will display the charging progress and
any relevant information.
3. If you have a model with a camera, the camera will detect your license plate.
4. Observe the charging status display light on the EVSE:
• Blue/Purple Light: When the charging status display light is blue/purple, it
indicates that the charger is operating normally without any issues.
• Red Light: If the charging status display light turns red, it signifies an abnormal
condition. This could indicate a fault in the charging system or an issue that
requires attention.
5. When the charging is complete, you will receive a notification and can disconnect
your vehicle from the charging station.
⚠
Important
If you are using the EVSE for the first time, you need to register your user account or
∙
provide your payment information.
If you encounter any issues using your EVSE, please feel free to contact our
∙
manufacturer support team for professional assistance and answers.

Charging Procedures

1. Ensure that your electric vehicle is in park and the parking brake is engaged before
beginning the charging process.
2. Connect the charging connector to your vehicle's charging port.
3. Follow the instructions on the screen to select the appropriate charging
parameters.
4. Wait for the charging process to complete.
5. Disconnect the charging connector from your vehicle.
6. Return the charging connector to holster.
18