Subscribe to Our Youtube Channel
Related Manuals for MSI Modern MD272QXP
Summary of Contents for MSI Modern MD272QXP
- Page 1 Modern Series LCD Monitor Modern MD272QXP (3PB1) Modern MD272QXPW (3PB1) User Guide...
-
Page 2: Table Of Contents
Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Adjusting the Monitor ..................... 6 Monitor Overview ....................7 Connecting the Monitor to PC ................9 OSD Setup ........................10 OSD Keys ......................10 OSD Menus........................11 Professional ...................... -
Page 3: Getting Started
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Modern MD272QXP Monitor Modern MD272QXPW Documentation Quick Start Guide... -
Page 4: Installing The Monitor Stand
Installing the Monitor Stand 1. Leave the monitor in its protective packaging. Align the stand to the monitor groove. 2. Push the stand towards the monitor groove until it locks in place. 3. Connect the base to the stand and tighten the base screws to secure the base. 4. - Page 5 ⚠ Important Place the monitor on a soft, protected surface to avoid scratching the display panel. ∙ Do not use any sharp objects on the panel. ∙ This product comes with NO protective film to be removed by the user! Any ∙...
-
Page 6: Adjusting The Monitor
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. ∙ Please slightly tilt the monitor backwards before pivoting it. ∙ -5° 20° 110 mm 30°... -
Page 7: Monitor Overview
Monitor Overview... - Page 8 OSD Keys Power Button & Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. Power Jack USB Type-C Port USB Type-C This port supports DisplayPort Alternate (DP Power Delivery...
-
Page 9: Connecting The Monitor To Pc
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4. Connect the external power supply to the monitor power jack. (Figure B) 5. -
Page 10: Osd Setup
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. OSD Keys The monitor comes with a set of OSD Keys that help to control the On-Screen Display (OSD) menu. -
Page 11: Osd Menus
OSD Menus ⚠ Important The following settings will be grayed out when HDR signals are received: Low Blue Light Contrast ∙ ∙ HDCR Color Temperature ∙ ∙ Brightness ∙ Professional 1st Level Menu 2nd/3rd Level Menu Description Mode ∙ Use Up or Down Button to select and preview mode effects. - Page 12 1st Level Menu 2nd/3rd Level Menu Description MPRT ∙ MPRT is available when the refresh rate is over 85 Hz. ∙ Activating MPRT will affect: Affected Function Function Status » Brightness Unable to select » Response Time » HDCR Set to OFF »...
-
Page 13: Image
1st Level Menu 2nd/3rd Level Menu Description Screen Assistance None ∙ Users can adjust Screen Assistance in any mode. Auto ∙ Auto allows the monitor to automatically switch between USB input sources, such as keyboards, Upstream mice or other USB devices. ∙... -
Page 14: Input Source
1st Level Menu 2nd/3rd Level Menu Description Low Blue Light ∙ Low Blue Light protects your eyes against blue light. When enabled, Low Blue Light adjusts the screen color temperature to a more yellow glow. ∙ When Pro Mode is set to Anti-Blue, it is mandatory to enable Low Blue Light. -
Page 15: Navi Key
Navi Key 1st Level Menu 2nd Level Menu Description Enter ∙ All Navi Key items can be adjusted via OSD Menus. Left Brightness Right Mode Alarm Clock Input Source Refresh Rate Info. On Screen Audio Volume Setting 1st Level Menu 2nd Level Menu Description Language... - Page 16 1st Level Menu 2nd Level Menu Description HDMI™ CEC ∙ HDMI™ CEC (Consumer Electronics Control) supports Sony PlayStation®, Nintendo® Switch™, Xbox Series X|S consoles and various audio-visual devices that are CEC-capable. ∙ If HDMI™ CEC is set to ON: ∙ The monitor will automatically power on when the CEC device is turned on.
-
Page 17: Specifications
Specifications Modern MD272QXP Monitor Modern MD272QXPW 27 inch Size Curvature Flat Panel Type Resolution 2560 x 1440 (WQHD) Aspect Ratio 16:9 ∙ Typical SDR: 400 nits Brightness ∙ Peak HDR: 400 nits Contrast Ratio 1000:1 Refresh Rate 100Hz 4ms (GTG) - Page 18 Modern MD272QXP Monitor Modern MD272QXPW Kensington Lock ∙ Plate Type: 75 x 75 mm ∙ Screw Type: M4 x 10 mm VESA Mounting • Thread Diameter: 4 mm • Thread Pitch: 0.7 mm • Thread Length: 10 mm Dimension (W x D x H) 613.5 x 200.8 x 413.3 mm...
-
Page 19: Preset Display Modes
Preset Display Modes ⚠ Important All information is subject to change without prior notice. Modern MD272QXP Modern MD272QXPW Standard Resolution HDMI™ USB-C Full HD 1920x1080 @60Hz 2560x1440 @60Hz @85Hz @100Hz Video Timing Resolution 720P 1080P @60Hz... -
Page 20: Troubleshooting
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on. -
Page 21: Safety Instructions
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device. - Page 22 ∙ If any of the following situations arises, get the device checked by service personnel: • The power cord or plug is damaged. • Liquid has penetrated into the device. • The device has been exposed to moisture. • The device does not work well or you can not get it working according to the User Guide.
-
Page 23: Tüv Rheinland Certification
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light. -
Page 24: Regulatory Notices
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com... - Page 25 Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.
- Page 26 Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners.
Need help?
Do you have a question about the Modern MD272QXP and is the answer not in the manual?
Questions and answers