Advertisement
3 Operating Instructions
3-1-2. Connection to Your Computer
qT.
Macintoshll Family Computers
This monitor requires a cable adapter for use
with a Macintosh computer. The MacMaster
Cable Adapter supports all monitors and all
Macintosh, Centris, Quadra, Duo Dock, and
Power Macintosh computers. If you do not
already have a cable adapter, check with your
computer dealer.
Refer to your computer and cable adapter
User's Manuals to help determine the
appropriate display mode and resolution.
This monitor supports 640x480, 832x624 and
1024x768 resolutions for the Macintosh.
The resolution most highly recommended is
832x624.
Set the display mode and resolution using the
DIP switches on the cable adapter.
Power off your Macintosh computer and
monitor including other peripheral devices.
5.
Connect the cable adapter to the video port of
the Macintosh computer. Tighten the screws
on the cable adapter.
3-2
Connect the monitor signal cable to the other
end of the cable adapter. Tighten the screws of
the monitor signal cable onto the cable adapter
to ensure proper connection.
Connect one end of the power cord to the
monitor and the other end to the power outlet.
Power on your monitor and Macintosh
computer. If you see any message on your
monitor screen, installation is complete. If you
do not see any messages, check each of your
connections and DIP switch settings and
reboot your system.
If you need more information, please refer to
the MacMaster Cable Adapter User's Manual,
or contact the Technical Support Center.
Samsung Electronics SyncMaster 15GLi
Advertisement
