Advertisement
3
Operating
Instructions
_
This section of the service manual explains how to connect the SM15GLi color monitor to IBM or
PC-compatible computers, as well as to Apple Macintosh computers. It also shows the location of the
monitor's front panel controls, explains their functions and gives examples that show how to properly
adjust these controls.
3-1 Installation
3-1-1 Connection to Your Computer
IBM or PC-Compatible
To install your monitor, follow these steps:
1. Turn off the power to the monitor and
computer.
2.
Place the monitor on a flat, sturdy surface.
3. Connect one of the 15-pin D-sub connectors on
the signal cable to the video port on your
computer. Tighten the attachment screws.
(Refer to your computer owner's manual for
the location of the video connector.)
4. Connect the other 15-pin D-sub connector on
the cable to the signal input connector on the
back of the monitor. Tighten the attachment
screws.
Figure 3-1. Rear of Monitor
5. Connect the power cable to the monitor and
plug the power cord into the power outlet.
6. Adjust the screen tilt and swivel to suit your
needs.
7. Turn on your computer and then the monitor.
Samsung Electronics SyncMaster 15GLi
3-1
Advertisement
