Scanner Error On Transmit; Scanner Not Operational - Link Test Function Canceled - IBM 3725 Manual

Scanner Error on Transmit
Cause: A scanner error occurred.
Action:
1. Press Power ON to reset the 3 725.
2. Re-IPL the Link Test program.
3. Restart the test.
If the error persists, contact the service representative.
Notes:
1. The SCP, LCS, and SES are also displayed for this type of error.
2. Some errors of this type may disable the link. In this case, the PF 1 key is not
made available and the following message is displayed in the message area:
LINK DISABLED - LINK TEST FUNCTION CANCELED.
Scanner not Operational - Link Test Function Canceled
Cause: The scanner supporting the link to be tested is not operational.
Action:
1. IML the scanner (see the Operating Guide).
2. Restart the test.
3. If the error persists, contact the service representative.
3-8
3725 Communication Controller Stand-Alone Link Tests
~',
\
""'/