4. Press SEND to validate the selection. One of the following screens will be
displayed, depending on the options that you entered:
•
Investigation mode.screen.
•
Statistical mode screen.
~
!
.
•
Personal pattern screen.
\... ' - "' .
Note: Whatever the mode you selected, the test stops when the specified count of
./~
tests (if any) is exhausted; the link test function is terminated. You can also stop
the test at any time by pressing the ATTN key. You may then decide to continue
the test or to terminate the link test function by entering 'T' in the SELN area.
2-6
372S Communication Controller Stand-Alone Link Tests
1··~-.
\
"""··-"
c·