ASSEMBLY
Pairing the Remote
1.
Insert batteries into the remote (H). Connect the power adaptor (G) to the TV
mount (A) and then using a pin or other small item (such as a paperclip) press the
code button located on the side of the TV mount. The TV mount will emit a beep .
2.
Press the Set button on the remote, you will hear a series of beeps for 10
seconds, the remote control is now successfully paired to the TV Mount.
G
Turn Swing Arm 90°
Stand the mount up while holding the swing arm lightly, press the left or right directional
button on the remote to open the swing arm until it reaches 90° or the screw holes on the
wall plate are fully accessible, then unplug the power adaptor
90°
8
A
Set button
H