Advertisement
OPERATION
Adjusting the TV Mount
• Ensure the remote has been paired to the TV mount (refer to Assembly section).
Note: Even if/when TV mount is unplugged after initial pairing, you will not have to pair
the TV mount to the remote again.
• Press and release left directional button ( ), the TV wall mount will swivel to the left,
press the OK button to stop.
• Press and release left directional button ( ), the TV wall mount will swivel to the right,
press the OK button to stop.
• The TV wall mount can be installed in 2 directions (normal or reverse installation). If the
swivel direction of the TV wall mount is different from the direction button you pressed,
set the remote control by following the process:
o
Press and hold the UP directional button ( ) for 5 seconds until you hear a
beep , the remote control is now successfully set to operate the mount in the
correct orientation.
Storing a Position to Memory
• Position 1: When the TV Mount is in the desired position, press and hold Mem1 button
for 2 seconds. You will hear a single "beep" sound indicating the position has been
successfully saved in Position 1.
• Position 2: When the TV Mount is in the desired position, press and hold Mem2
button for 2 seconds. You will hear a single "beep" sound indicating the position has
been successfully saved in Position 2.
Recalling a Saved Position
• To recall the first saved position, press 1
swivel to position 1.
• To recall the second saved position, press 2
automatically swivel to position 2.
18
utton, the TV wall mount will automatically
utton, the TV wall mount will
Advertisement
