Paradyne 3151 Quick Reference page 8

Factory default configuration options are shown in boldface type in the following tables.
Table 1. DTE Interface Configuration Options
Option Factory 1
DTE Framing: DTE Framing:
DTE Coding: DTE Coding:
Equal: Equal:
(DTE Line (DTE Line
E Equalizer) li )
Extrn DLB:
(External DTE (External DTE
Loopback)
Send AIS: Send AIS:
Yellow: Yellow:
Table 2. Network Interface Configuration Options (1 of 2)
Option Factory 1
NET Framing: NET Framing:
NET Coding: NET Coding:
LBO: LBO:
ANSI PRM: ANSI PRM:
Mgmt Link: Mgmt Link:
Factory 2
D4 D4
ESF ESF
AMI AMI
B8ZS B8ZS
0–133 0–133
133–266 133–266
266–399 266–399
399–533 399–533
533–655 533–655
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Enab Enab
Disab Disab
Factory 2
D4 D4
ESF ESF
AMI AMI
B8ZS B8ZS
0.0 0.0
–7.5 –7.5
–15.0 –15.0
–22.5 –22.5
Enab
N/A N/A
Disab
Enab Enab
Disab Disab
6
Comments/Description
Selects D4 or ESF framing format. Selects D4 or ESF framing format
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
Selectable extended DTE range
capability. capability.
Allows control of DLB on external Allows control of DLB on external
contact closure.
Sends AIS to the DTE on failure of the Sends AIS to the DTE on failure of the
Network interface signal.
Transcodes and sends Yellow signal to
the DTE on receiving Yellow from the the DTE on receiving Yellow from the
Network.
Comments/Description
Selects D4 or ESF framing format. Selects D4 or ESF framing format
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
Line Build Out in dB. Line Build Out in dB
Sends ANSI Performance Report Sends ANSI Performance Report
Messages.
Specifies whether the FDL s Specifies whether the FDL's
Management Link is enabled.